Displaying 481 - 490 results of 616 for ""
Published: 2006
Category:
Pre-surfacing repairs
,
Maintenance
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification for pre-surfacing repairs replaces the specifications TNZ C4, C5, C6, C7 and C8.
Published: 2003
Category:
Construction
,
Asphalt
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This method describes the use of the standpipe permeameter to assess the permeability of compacted hot mix asphalt pavement surfacings.
Published: December 2011
Category:
Road safety hardware and practice
,
Technical memoranda
| Audience:
Road traffic engineers & consultants
To advise on the recommended practice for the nesting of non-proprietary semi-rigid barrier systems (W-Beam and Thrie-Beam).
Published: 2006
Category:
Application
,
Road marking
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification applies to the marking of sealed and paved road surfaces in paint and thermoplastic road marking materials that are reflectorised by means of an application of glass beads.
Published: May 2006
Category:
Surfacings & asphalt
,
Technical memoranda
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
This report identifies possible methods and constraints on the use of waste tyre rubber in asphalt in New Zealand.
Published: 1995
Category:
Materials
,
Delineation
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This specification and guidance notes apply to the installation of raised pavement markers.
Published: February 2023
Category:
Materials
,
Delineation
,
Specifications
| Audiences:
Road traffic engineers & consultants,
Roading contractors
The M12 Specification for the Design, Manufacture, Installation and Maintenance of Raised Pavement Markers, NZTA M12-S, and associated documents M12-F (Field Test for Raised Pavement Markers, M12-C (Certificate and Worksheet Templates for Raised Pave…
Published: 2006
Category:
Safety management systems
,
Forms
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants
A visual check sheet system, and report form, for road controlling authority and contractor field staff to assess common maintenance issues.
Published: June 2005
Category:
Quality assurance
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Transit has adopted a two level concept where contracts involving road construction, road maintenance, and structures activities are assigned a quality assurance level High (TQS1) or Normal (TQS2).
Published: June 2005
Category:
Quality assurance
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
Transit has adopted a two level concept where contracts involving road construction, road maintenance, and structures activities are assigned a quality assurance level High (TQS1) or Normal (TQS2).