Back to Resources

Research Report 539 A new vehicle loading standard for road bridges in New Zealand

Published: | Category: Natural hazard risk management , Integrated land use and transport systems , Safety, security and public health , Research programme , Research & reports | Audience: General

This research report proposes a new vehicle loading standard for the design and evaluation of road bridges and other highway infrastructure in New Zealand. It is based upon a literature review of current traffic loading and bridge evaluation specifications in New Zealand and overseas, as well as a review of studies into the economic aspects of bridge design loadings and the economic benefits of increasing the mass limits of heavy vehicles in Australia and New Zealand.

The development of a new design loading standard took into consideration the future freight need and likely configuration of vehicles to meet that need, as well as analysing the loading from current traffic. Weigh-in-motion data, responses to an industry questionnaire on desired vehicle configurations, loading effects from a range of legally loaded vehicles, permit application vehicles and mobile cranes were all considered in determining the recommended design vehicle loading standard.

New evaluation loading standards are recommended for Class 1 and HPMV vehicle loading.

The report also includes recommendations on axle and wheel loading, lane widths and number of lanes, multiple presence, dynamic load allowance, horizontal loads and load factors.

Keywords: axle load, bridge design load, dynamic load allowance (DLA), load factor, vehicle load, weigh-in-motion (WiM), wheel load

Publication details

  • Author:
  • Published: November 2013
  • Reference: 539
  • ISBN/ISSN: 978-0-478-40789-1