Archive - this information is for reference only and no longer maintained.

Introduction

This work category provides for the upgrade or replacement of existing bridges and other road structures, where this is the main purpose of the work.

Examples of qualifying activities

Examples of qualifying activities include, but may not be limited to:

  • replacing a structurally inadequate bridge
  • replacing a bridge for non-structural reasons, such as inadequate width or waterway
  • modifying an existing bridge to increase its structural capacity to a level higher than originally provided
  • widening an existing bridge
  • approach work estimated to cost less than $50,000
  • for local road projects property purchase costs less than $50,000
  • replacing retaining structures, including sea walls, that support a road
  • replacing tunnels
  • replacing culverts having a cross-sectional area of 3.4 square meters or greater, and
  • sealing bridge approaches on unsealed roads, where:
    • the approach sealing is limited to a maximum distance of 50 metres from each abutment, and
    • the seal continues over the entire structure to ensure consistency of skid resistance.

Other potential activities not shown above should be discussed with the Transport Agency for eligibility.

Funding approval is subject to conditions as set out below.

Exclusions

Exclusions include:

Conditions of funding approval

The conditions of funding for replacement of bridges and structures include:

  • the cost of proposed replacement must be checked against the Transport Agency’s policy on uneconomic roading facilities prior to an application being submitted through Transport Investment Online.
  • new or replacement bridges proposed for funding from the National Land Transport Fund must conform to the requirements of the Transport Agency’s Bridge Manual. The Transport Agency may approve a specific departure from these design standards in terms of its policy on uneconomic roading facilities.

Funding assistance rate (FAR)

The usual funding assistance rate is:

Applying for funding approval

Applications for funding approval of proposed projects should be made through the 'Improvement activity' module in Transport Investment Online(external link) (TIO). To be eligible for NLTF funding, any new activity must be added to the relevant Regional Land Transport Plan and to the NLTP.

End of year carryover

Transport Investment Online (TIO) will automatically carryover the unspent allocation every year.  Therefore it is vital that Approved Organisations and the Transport Agency (State Highways) declare the unused allocation for completed projects by making a cost scope adjustment via the Reviews module in TIO.