Resources

This specification for pre-surfacing repairs replaces the specifications TNZ C4, C5, C6, C7 and C8.

This method describes the use of the standpipe permeameter to assess the permeability of compacted hot mix asphalt pavement surfacings.

This specification applies to the marking of sealed and paved road surfaces in paint and thermoplastic road marking materials that are reflectorised by means of an application of glass beads.

This specification and guidance notes apply to the installation of raised pavement markers.

This specification describes technical, testing and certification requirements for temperature controlled raised pavement marker heaters to be used for work with NZ Transport Agency P14 Specification for raised pavement markers installation (P14) and…

The M12 Specification for the Design, Manufacture, Installation and Maintenance of Raised Pavement Markers, NZTA M12-S, and associated documents M12-F (Field Test for Raised Pavement Markers, M12-C (Certificate and Worksheet Templates for Raised Pave…

Transit has adopted a two level concept where contracts involving road construction, road maintenance, and structures activities are assigned a quality assurance level High (TQS1) or Normal (TQS2).

Transit has adopted a two level concept where contracts involving road construction, road maintenance, and structures activities are assigned a quality assurance level High (TQS1) or Normal (TQS2).

This procedure defines standard nomenclature and methods of measurement for describing the location of test points on state highways.