Back to Resources

Frontal impact compliance status of vehicles by vehicle make

These lists show the Class MA vehicles (passenger cars) by make and model that manufacturers have advised as meeting (or not meeting) New Zealand's frontal impact requirements. For completeness we have included some lists that were produced at the time frontal-impact legislation was being implemented in various countries, and some of these lists have not been updated since then.

Please note that the information on these lists is supplied by vehicle manufacturers, and is not exhaustive. The NZ Transport Agency has taken every reasonable precaution to ensure the accuracy of this information. Contact an entry certifier if you are in doubt about any of the information in these lists.

Frontal impact compliance status of vehicles by vehicle make

Audi – revision 3

You must read our information about Importing a vehicle in conjunction with this information.

Recognising a frontal impact compliant Audi vehicle

To determine frontal impact compliance for Class MA Audi models, examine the vehicle identification number (VIN) following the instructions outlined in the boxes below.

Audi A3, A4, A4 Cabriolet

Class MA Audi A3 and Audi A4 models that are German-assembled and manufactured in right-hand drive form will comply with an approved frontal impact standard if they have a VIN that:

  • Starts with the letters WAU

AND

  • Has a 10th character that is a V, W, X, Y, 1, 2,3,4 or 5*

For example a vehicle with a VIN of WAU ###### V# ###### would be frontal impact compliant.


Audi A6, Allroad, A8

Class MA Audi A6 and Audi A8 models that are German-assembled and manufactured in right-hand drive form will comply with an approved frontal impact standard if they have a VIN that:

  • Starts with the letters WAU

AND

  • Has a 10th character that is a W, X, Y, 1, 2,3,4 or 5*

For example a vehicle with a VIN of WAU ###### W# ###### would be frontal impact compliant.


Audi TT Coupe and Roadster

Class MA Audi TT models that are German-assembled and manufactured in right-hand drive form will comply with an approved frontal impact standard if they have a VIN that:

  • Starts with the letters TRU

AND

  • Has a 10th character that is a X, Y, 1, 2,3,4 or 5*

For example a vehicle with a VIN of TRU ###### X# ###### would be frontal impact compliant.

WARNING: If there is any doubt that a vehicle is German assembled, contact the manufacturer’s representative prior to importation. Any variations on the VIN to the manufacturer’s identification of WAU or TRU should be directed to the manufacturer ’s representative for clarification.

* Note: The 10th character denotes the model year, as follows:

10th Character of VIN
Model Year
V
1997
W
1998
X
1999
Y
2000
1
2001
2
2002
3
2003
4
2004
5
2005

Disclaimer – All reasonable efforts have been taken to ensure this information is accurate. However, the information is not legal advice, may contain information provided by other information providers, and may be changed, deleted, added to or otherwise amended without notice. Nor does NZ Transport Agency endorse or guarantee any other organisations or persons linked or referred to, or the accuracy of their information. Before acting on the information contained (or linked or referred to) in this document you should take specific advice from qualified professional people. NZ Transport Agency does not accept any responsibility or liability whatsoever whether in contract, tort, equity or otherwise for any action taken as a result of reading, or reliance placed on NZ Transport Agency because of having read, any part, or all, of the information, or for any error, inadequacy, deficiency, flaw in or omission from that information. You ignore this Disclaimer at your own risk.

Last updated: 13 April 2005