Published: December 2018 | Category: Forms | Audience: Heavy vehicle operators
The inspection described in this form must have been done less than 30 days and fewer than 15,000km before the CoF inspection in which it is used. A technician must do the inspection. The form can be form signed by either a technician or the operator.
Heavy vehicle operators must maintain the skid plate assembly on their vehicles in accordance with best practice. This form is used by a heavy vehicle operator to confirm a vehicle’s skid plate structural condition is within safe tolerances and must be presented at CoF inspection.
Related information
Servicing (heavy vehicles)
Read our information sheet and about skid plate guide(external link)
Go to the Vehicle inspection portal to download the 50mm and the 90mm NZTA 4085B operator statement of skid plate inspection and maintenance forms(external link).
These forms are used by a heavy vehicle operator to confirm a vehicle’s skid plate structural condition is within safe tolerances.
