NZ Transport Agency logo

Land Transport Rule: External Projections 2001

Incorporated by reference

Section/standard Title Source of material Version View the material Free of charge?
(Y/N)
Council Directive 92/114/EEC Council Directive 92/114/EEC of 17 December 1992 relating to the external projections forward of the cab’s rear panel of motor vehicles of category N. European Commission (EU) Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  http://eur-lex.europa.eu/RECH_naturel.do
or
http://eur-lex.europa.eu/RECH_consolidated.do
for consolidated text.		 Y
Australian Design Rule 42,  General Safety Requirements (section on external and internal protrusions); Department of Infrastructure and Transport (Australia) Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  www.infrastructure.gov.au/roads/motor/design/adr_online.aspx Y
Council Directive 74/483/EEC Council Directive 74/483/EEC of 17 September 1974  on the approximation of the laws of the Member States relating to the external projections of motor vehicles; European Commission (EU) Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  http://eur-lex.europa.eu/RECH_naturel.do
or
http://eur-lex.europa.eu/RECH_consolidated.do
for consolidated text.		 Y
UN/ECE Regulation No. 26  Uniform provisions concerning the approval of vehicles with regard to their external projections (E/ECE324-E/ECE/TRANS/505/Rev.1/Add.25); United Nations Economic Commission for Europe Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  http://live.unece.org/trans/main/wp29/wp29regs.html  Y
UN/ECE Regulation No. 61 Uniform provisions concerning the approval of their external projections forward of the cab's rear panel (E/ECE324-E/ECE/TRANS/505/Rev.1/Add.60); United Nations Economic Commission for Europe Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  http://live.unece.org/trans/main/wp29/wp29regs.html  Y
Low Volume Vehicle Code, Low Volume Vehicle Code, Low Volume Vehicle Technical Association   www.lvvta.org.nz/documents.html#standards
Hard copy available for viewing at NZTA Library.		 Y
Structural Standard for Air Spoilers (Japan). Structural Standard for Air Spoilers (Japan). Japan Automobile Standards Internationalization Center (JASIC) in the Automobile Type Approval Handbook for Japanese Certification. Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  Hard copy available for viewing at NZTA Library. N
Technical Standard for Impact Reduction of Outside Rearview Mirrors (Japan); Technical Standard for Impact Reduction of Outside Rearview Mirrors (Japan); Japan Automobile Standards Internationalization Center (JASIC) in the Automobile Type Approval Handbook for Japanese Certification. Applicable version varies depending on year of manufacture and type of vehicle. Contact the NZTA Vehicles Unit if assistance is required.  Hard copy available for viewing at NZTA Library. N


Abbreviations
ABG Allgemeine Bauartgenehmigung
ADR  Australian Design Rule
ANSI American National Standards Institute
AS Australian Standard
BS British Standard
EEC, EC European Economic Community, European Communities
FMVSS Federal Motor Vehicle Safety Standard
IMDG International Maritime Dangerous Goods Code
JIS Japanese Industrial Standard
LTSA Land Transport Safety Authority of New Zealand 
MoT Ministry of Transport, New Zealand
NZS  New Zealand Standard
SABS South African Bureau Standards
SAE Society of Automotive Engineers
UN/ECE United Nations Economic Commission for Europe
UNRTDG  United Nations Recommendations on the Transport of Dangerous Goods – Model Regulations