Skip to content

Access keys for nzta.govt.nz

  • h Home
  • m Menu
  • 0 Show list of access keys
  • 2 Skip to content
  • 3 Skip to top

Filter by:

No results found

Ratchet tie-down slide

5 Oct 2016

Ratchet tie-down slid down from suspended load - The Piling Crew were demobing the vibro hammer, power pack and connecting hydraulic hose bundle using the...

Redundant TTM Equipment

5 Sep 2016

Urgent action required on redundant TTM equipment on the Auckland Transport road corridor is proving to be a serious issue.

Working from height - clamp fall

1 Sep 2016

Poor housekeeping and a gap in the kick board resulted in a half clamp falling from height, having potential to cause serious injury. When working...

Laceration to left thumb - knife injury

11 Aug 2016

An incident while stripping cable using a hawksbill bladed knife resulted in a laceration to thumb requiring 3 stitches. The person was not wearing...

Fall from height exposure

11 Aug 2016

Sub-contract worker exposed themselves to a 5 metre fall due to poor decision and insufficient supervision.

Failure of EWP Jib Ram Pin (updated)

5 Aug 2016

At 13:20 on 4 August 2016, a Snorkel A46JRT EWP was being trammed near XP2 in the Northbound Tunnel. A failure of the jib ram...

Fractured Fibula

23 Jun 2016

In June 2016, the Injured Party (IP) was waiting to conduct his random D&A test at the van where there was no shelter when it...

Lacerated thumb using table saw

21 Jun 2016

NOTE: GRAPHIC IMAGE CONTAINED IN DOCUMENT. In June 2016 the IP was tasked with cutting formwork for a concrete pour. The IP chose to utilise...

No fall protection

2 Jun 2016

A dogman was observed assisting positioning a window installation by leaning over the edge of the top of the NVB. The handrail height at this...

Top