Resources

WITHDRAWN - This specification and associated notes covered the design, fabrication and testing of tubular section, galvanised steel friction fit jointed street light columns of the ground planted, flange mounted and frangible base type.

This specification replaces M/19 which is now long out of date.

Index to all the signs and markings (permanent and temporary) manuals and relevant specifications.

A crash analysis of the effect of shoulder improvements on open road routes and bends.

This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.

This specification and guidance notes are to be appended to P/4 Resealing and shall apply where natural rubber latex is to be added to the bituminous binder for resealing purposes.

The T31 laboratory test method is used to quantify the adhesion between a bituminous binder dosed with adhesion agent and a mineral aggregate.

This specification (M07) and accompanying notes cover paints and other materials used for delineation on road surfaces.

P04 Specification for resealing sets out a client-prescribed method for the construction of a chip seal on a pavement that has an existing surfacing.

This specification describes technical, testing and certification requirements for mechanically controlled road marking paint applicators to be used for work in compliance with P/12 Specification for pavement marking and P/22 Specification for reflec…