Resources

This test method covers the procedure for sampling and for determination of percentage fines, average least dimension (ALD), average greatest dimension (AGD), distribution of least dimensions, and incidence of broken faces in grades 1–4 stone sealing…

Index to all the signs and markings (permanent and temporary) manuals and relevant specifications.

This manual sets out the required screening procedure to be used for the initial stage, which identifies and ranks those bridges that are considered by the screening consultant to justify subsequent detailed assessment of their earthquake resistance.

This specification and guidance notes are to be appended to P/4 Resealing and shall apply where natural rubber latex is to be added to the bituminous binder for resealing purposes.

This P49 specification outlines the requirements for implementation of the NZ Transport Agency Waka Kotahi Sustainability Rating Scheme Policy.

The T31 laboratory test method is used to quantify the adhesion between a bituminous binder dosed with adhesion agent and a mineral aggregate.

This specification (M07) and accompanying notes cover paints and other materials used for delineation on road surfaces.

This specification describes technical, testing and certification requirements for mechanically controlled road marking paint applicators to be used for work in compliance with P/12 Specification for pavement marking and P/22 Specification for reflec…

M13 specification for adhesion agents (version 2) sets out the requirements for the testing and use of adhesion (anti-stripping) agents in cutback bitumen used for chip sealing.