Displaying 31 - 40 results of 96 for ""
Published: May 2000
Category:
Pavement design
,
Manuals
| Audience:
Road traffic engineers & consultants
This version of the supplement is to be used for the design of pavement rehabilitation treatments.
Published: February 2018
Category:
Project & contract management
,
Manuals
| Audiences:
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
This minimum standard has been developed to promote a consistent and uniform approach to the provision of risk management services from suppliers delivering NZ Transport Agency contracts.
Published: April 2014
Category:
Environment & resource planning
,
Manuals
| Audience:
Roading contractors
The Guideline for preparing an environmental and social management plan details the minimum requirements for all NZ Transport Agency environmental and social management plans (ESMP).
Published: May 2013
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This Bridge manual sets out the criteria for the design and evaluation of bridges, culverts, stock underpasses and subways, the design of earthworks and retaining structures.
Published: July 2001
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
Road traffic engineers & consultants
Guidelines for best practice bridge inspection and maintenance.
Published: October 2009
Category:
Structures (bridges & culverts)
,
Manuals
| Audience:
General
The BDS was used for maintaining up-to-date structural information for all structures on the state highway network that are sensitive to overweight vehicle loads, and was used by OPermit to assist with the evaluation of overweight permit applications…
Published: 1 November 2012
Category:
Signs & markings (permanent & temporary)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This is a reference for temporary traffic management on state highways and local roads.
Published: November 2022
Category:
Structures (bridges & culverts)
,
Manuals
| Audiences:
Road traffic engineers & consultants,
Roading contractors
This NZTA S6 policy document sets out the requirements for the inspection of bridges and other significant structures on the state highway network including the structural aspects of tunnels.
Published: September 2014
Category:
Environment & resource planning
,
Manuals
| Audiences:
Local & regional government,
Road controlling authorities,
Road traffic engineers & consultants,
Roading contractors
The guidelines have been developed to assist roading practitioners with the selection and design of erosion and sediment control practices.
Published: April 2014
Category:
Environment & resource planning
,
Manuals
| Audience:
Roading contractors
This guideline has been superseded by the Guideline for preparing an environmental plan, which is available on our Environmental management plans page.