Resources

This Q05 specification has been developed to set out the standard processes required by Waka Kotahi so that assurance can be provided that bitumen of acceptable quality is imported into New Zealand and applied to road pavement surfacings.

This test procedure covers the determination of the rebound deflection of a pavement under a standard wheel load and tyre pressure, with or without temperature measurements.

This specification and guidance notes shall apply to the construction of unbound granular pavement layers.

This specification and guidance notes cover the construction of earthworks including the clearing and removal of all obstacles within the limits of the earthworks; the excavation of all cuts, including excavation below the final subgrade surface; the…

Guidelines for pavement specifications for primary cycling routes including cycle lanes and cycle paths, shared paths and separated cycleways, as well as pavement shoulders where cycling demand is high and where a high level of service is desired.

The NZTA B10 Specification for Hi-Lab design, production and construction (version 1) and Notes (version 1) has been developed and published.

Specification and guidance notes for the supply of aggregate by weight.

M03 Specification for sub-base aggregate and accompanying notes sets out requirements for sub-base aggregate for use on state highways and other heavily trafficked roadways.

This specification and guidance notes sets out design, maintenance and performance requirements of the surfacing and unbound flexible pavement layers for the construction of new pavements and re-construction of existing pavements.