Skip to content

Important notice

The building where our contact centre is based was evacuated on 13 June. Our contact centre and emails are up and running again, but please be patient as we have limited support available. If you’re waiting for an application, please have a look at our current processing times.

Access keys for nzta.govt.nz

  • h Home
  • m Menu
  • 0 Show list of access keys
  • 2 Skip to content
  • 3 Skip to top

Resources

Back to Resources

Dense graded and stone mastic asphalt

Published: | Category: Construction , Asphalt , Specifications | Audiences: Road traffic engineers & consultants, Roading contractors

The M/10 dense graded and stone mastic asphalt specification (version 5) and notes (version 3) cover dense graded and stone mastic asphalt for roads and related applications.

The areas covered by this specification include:

  • asphalt materials
  • asphalt mix design requirements
  • process control in manufacture and placement of asphalt
  • acceptance criteria for asphalt
  • quality systems, minimum process standards, plant requirements and sampling and testing frequencies.

M/10 replaced P/9 asphaltic concrete paving construction.

Publication details

  • Author:
  • Published: September 2014
  • Reference: SP/SM/010 | SP/NM/010
  • Conditions: This specification is mandatory for state highways and recommended for local roads.
  • Also known as: M10, M/10 | M10 Notes, M/10 Notes, TNZ M10, TNZM10
Top