Resources

This specification and guidance notes apply to the installation of raised pavement markers.

This specification describes technical, testing and certification requirements for temperature controlled raised pavement marker heaters to be used for work with NZ Transport Agency P14 Specification for raised pavement markers installation (P14) and…

The M12 Specification for the Design, Manufacture, Installation and Maintenance of Raised Pavement Markers, NZTA M12-S, and associated documents M12-F (Field Test for Raised Pavement Markers, M12-C (Certificate and Worksheet Templates for Raised Pave…

This procedure defines standard nomenclature and methods of measurement for describing the location of test points on state highways.

This paper is for skid resistance practitioners to assist them with background to the T10 policy on curves.

The M01 bitumen specification and notes set out the requirements for bitumen used for pavements in New Zealand.

This specification sets out the material requirements for five size grades of sealing chip for use on state highways and other heavily trafficked roadways.

Stabilisation of pavement layers has a long history in New Zealand.

This specification sets out the requirements for maintenance of a road network that is at risk of snow and ice events to ensure the required road availability and levels of service are achieved during winter.

This specification, HM11 Surfacings, replaces specification TNZ C6 Specification for repair of surface defects.